2-PHASE (1.8°) NEMA 34 STEPPER MOTOR
Motor Length	156mm
Motor shaft diameter	14mm
Torque	12N
Motor shaft length	35mm
Lead Wires NO.	4 wire
Feature	Using high temperature copper coil

The motor is made of high-quality silicon steel material with high magnetic permeability and large resistance coefficient. The motor coil is made of pure copper enameled wire. The advanced winding process makes the copper wire evenly arranged, the motor temperature rise is lower, and the deformation problem will not occur for a long time.

FEATURES

Adoption of 32-bit DSP, pure sine wave subdivision technology
Low-noise, low-vibration and low temperature rising
Voltage 24-80VDC,or 20-60VAC
With 8 stalls output current setting, peak current 7.2A
With16 stalls microstep subdivision setting
Automatic half current, self-test, over voltage, under voltage, over current protection
Internal optical isolation, highest frequency response 200KHZ.
Suitable for current range 2.4-7.2A 2,4-phase nema23, nema34 Hybird stepper motor

Current selection

REF	Peak	SW1	SW2	SW3
2.00A	2.40A	ON	ON	ON
2.57A	3.08A	OFF	ON	ON
3.14A	3.77A	ON	OFF	ON
3.71A	4.45A	OFF	OFF	ON
4.28A	5.14A	ON	ON	OFF
4.86A	5.83A	OFF	ON	OFF
5.43A	6.52A	ON	OFF	OFF
6.00A	7.20A	OFF	OFF	OFF

Microstep Selection

Pulse/REV	SW5	SW6	SW7	SW8
Default	ON	ON	ON	ON
800	OFF	ON	ON	ON
1600	ON	OFF	ON	ON
3200	OFF	OFF	ON	ON
6400	ON	ON	OFF	ON
12800	OFF	ON	OFF	ON
25600	ON	OFF	OFF	ON
51200	OFF	OFF	OFF	ON
1000	ON	ON	ON	OFF
2000	OFF	ON	ON	OFF
4000	ON	OFF	ON	OFF
5000	OFF	OFF	ON	OFF
8000	ON	ON	OFF	OFF
10000	OFF	ON	OFF	OFF
20000	ON	OFF	OFF	OFF
40000	OFF	OFF	OFF	OFF

Driver Dimension:

Inquiry Cart 0