Changzhou Jinsanshi Mechatronics Co., Ltd
Changzhou Jinsanshi Mechatronics Co., Ltd
Add to Cart
Closed Loop 1.8 Degree High Torque NEMA 34 Cnc Stepper Motor With Driver
Low noise,
good dynamic characteristic,
good quality and reliable.
The same dynamic response speed with servo motor, but cheaper than servo motor.
Closed Loop Stepper Motor and Driver:
Features:
1. Position error correction and never lose steps
2. Quick response and perfect acceleration, High torque at high speed
3. Automatic current adjustment based on load, lower temperature rising
4. Over-current, over-voltage and position ultra difference protection function
5. Pulses response frequency can reach 200KHZ
6. 16 kinds microsteps choice, highest 51200microsteps/rev.
7. Drive nema 34 series 4.5N.m, 8N.m, 12N.m closed loop stepper motor
8. Voltage range: AC20V~80V, DC30V-110V
9. Parameter adjustable with RS232 port
Electrical Parameters:
| Mode | Step angle | Current (A) | Resistance (Ω±10%) | Inductance (mH±20%) | Holding torque (N.m) | Motor length (mm) |
Encoder Resolution(PPR) |
Weight(kg) | suitbale driver |
| 42HSE05N-D24 | 1.8° | 1.5 | 2.8 | 5.5 | 0.55 | 48 | 1000 | 0.45 | HSS42 |
| 57HSE2N-D25 | 1.8° | 4.2 | 0.5 | 1.8 | 2 | 76 | 1000 | 1.15 | HSS57 |
| 60HSE3N-D25 | 1.8° | 5 | 0.45 | 1.8 | 3 | 88 | 1000 | 1.55 | HSS60 |
| 86HSE4N-BC38 | 1.8° | 6.0 | 0.45 | 3.7 | 4.5 | 82 | 1000 | 2.65 | HSS86,HSS758 |
| 86HSE8N-BC38 | 1.8° | 6.0 | 0.44 | 3.7 | 8.5 | 118 | 1000 | 4.0 | HSS86,HSS758 |
| 86HSE12N-BC38 | 1.8° | 6.0 | 0.45 | 5.2 | 12 | 156 | 1000 | 5.65 | HSS86, HSS758 |
| 110HCE12N-B39 | 1.2° | 4.2 | 1.2 | 13 | 12 | 139 | 1000 | 8 | 3HSS2260 |
| 110HCE16N-B39 | 1.2° | 6.4 | 0.9 | 9.5 | 16 | 180 | 1000 | 10 | 3HSS2260 |
| 110HCE20N-B39 | 1.2° | 4.2 | 1.88 | 18 | 20 | 221 | 1000 | 12 | 3HSS2260 |
| 130HCE36N-B45 | 1.2° | 8.5 | 0.93 | 13.1 | 36 | 230 | 1000 | 20 | 3HSS2260 |
| 130HCE50N-B45 | 1.2° | 8.5 | 1.82 | 18.5 | 50 | 282 | 1000 | 24 | 3HSS2260 |
Motor Dimension:
Driver installation size: (mm)
Driver Wring Diagram:
Microstep selection:
| Micorstep/rev | SW3 | SW4 | SW5 | SW6 |
| Default(400) | on | on | on | on |
| 800 | off | on | on | on |
| 1600 | on | off | on | on |
| 3200 | off | off | on | on |
| 6400 | on | on | off | on |
| 12800 | off | on | off | on |
| 25600 | on | off | off | on |
| 51200 | off | off | off | on |
| 1000 | on | on | on | off |
| 2000 | off | on | on | off |
| 4000 | on | off | on | off |
| 5000 | off | off | on | off |
| 8000 | on | on | off | off |
| 10000 | off | on | off | off |
| 20000 | on | off | off | off |
| 40000 | off | off | off | off |
Torque/Frequency Curve:
Applications:
Stepper motor are widely applied in engraving machine, textile machine, 3D printer, medical instruments, stage light equipment, robot, CNC, music fountain, and other industrial automatic equipment.