Changzhou Jinsanshi Mechatronics Co., Ltd
Changzhou Jinsanshi Mechatronics Co., Ltd
Add to Cart
NEMA 23 CLOSED LOOP STEPPER MOTOR SYSTEM-HYBRID SERVO KIT 2NM
Size: 57*57mm
Phase No.: 2-phase
Holding torque: 2N.m
Encoder line: 1000ppr
Suitable driver: HSS57
Closed loop stepper motor and driver
Low noise, good dynamic characteristic, good quality and reliable. The same dynamic response speed with servo motor, but cheaper than servo motor.
Features:
Stepper motor closed loop system, never lose step.
Improve motor output torque and working speed.
Automatic current adjustment based on load, lower temperature rising.
Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter.
Motor work smoothly and low vibration, high dynamic performance at acceleration and deceleration.
No vibration from high speed to zero speed
Drive nema 23 series 2N.m closed loop stepper motor.
Pulses response frequency can reach 200KHZ
16 kinds microsteps choice, highest 51200microsteps/rev.
Voltage range: DC24V~50V
Over-current, over-voltage and position ultra difference protection
Electrical Parameters:
| Mode | Step angle | Current (A) | Resistance (Ω±10%) | Inductance (mH±20%) | Holding torque (N.m) | Motor length (mm) |
Encoder Resolution(PPR) |
Weight(kg) | suitbale driver |
| 42HSE05N-D24 | 1.8° | 1.5 | 2.8 | 5.5 | 0.55 | 48 | 1000 | 0.45 | HSS42 |
| 57HSE2N-D25 | 1.8° | 4.2 | 0.5 | 1.8 | 2 | 76 | 1000 | 1.15 | HSS57 |
| 60HSE3N-D25 | 1.8° | 5 | 0.45 | 1.8 | 3 | 88 | 1000 | 1.55 | HSS60 |
| 86HSE4N-BC38 | 1.8° | 6.0 | 0.45 | 3.7 | 4.5 | 82 | 1000 | 2.65 | HSS86,HSS758 |
| 86HSE8N-BC38 | 1.8° | 6.0 | 0.44 | 3.7 | 8.5 | 118 | 1000 | 4.0 | HSS86,HSS758 |
| 86HSE12N-BC38 | 1.8° | 6.0 | 0.45 | 5.2 | 12 | 156 | 1000 | 5.65 | HSS86, HSS758 |
| 110HCE12N-B39 | 1.2° | 4.2 | 1.2 | 13 | 12 | 139 | 1000 | 8 | 3HSS2260 |
| 110HCE16N-B39 | 1.2° | 6.4 | 0.9 | 9.5 | 16 | 180 | 1000 | 10 | 3HSS2260 |
| 110HCE20N-B39 | 1.2° | 4.2 | 1.88 | 18 | 20 | 221 | 1000 | 12 | 3HSS2260 |
| 130HCE36N-B45 | 1.2° | 8.5 | 0.93 | 13.1 | 36 | 230 | 1000 | 20 | 3HSS2260 |
| 130HCE50N-B45 | 1.2° | 8.5 | 1.82 | 18.5 | 50 | 282 | 1000 | 24 | 3HSS2260 |
Motor Dimension:
Driver Dimension:
Torque/Frequency Curve:
Electrical Parameter
| Voltage range | DC24~50V |
| Peak current | Peak 6.0A(current change according to load) |
| Logic input current | 7~20mA |
| frequency | 0~200KHz |
| Suitable motor | 42HSE05N |
| Encoder lines | 2500 |
| Insulation resistance | >=500MΩ |
Environment Parameter
| Cooling method | Natural or radiator | |
| Operating environment | Operating Occasions | try to avoid dust, oil, corrosion gas |
| Operating temprature | 0~50℃ | |
| Operating humidit | 40~90%RH | |
| virbration | 5.9m/s²Max | |
| Storage temperature | -20℃~65℃ | |
| Weight | About 300g | |
We use high quality raw material to ensure the motor quality, better performace, long using life:
Applications:
Stepper motor are widely applied in engraving machine, textile machine, 3D printer, medical instruments, stage light equipment, robot, CNC, music fountain, and other industrial automatic equipment.